Description:

Diggers Showercoat is a clear silicone based invisible water repellent that soaks into hairline cracks, porous tiles and grout, sealing without making the tiles slippery. Diggers Showercoat seals and prevents leaking showers.

Directions for use:

Ensure shower area is free from mould, grime and completely dry for 24 hours. Damaged grout should also be replaced before application and replace silicon if necessary. Brush Diggers Showercoat over joints and tiles, starting from the bottom and finish at the top.

Diggers Showercoat will penetrate into any hairline cracks in tiles.

Wipe excess Diggers Showercoat of all surfaces with a clean rag after 10 minutes. Leave shower recess to dry for 24 hours before using it.

Ensure area is well ventilated to improve drying time.

Coverage

Contents sufficient for two complete showers. (Approximately a surface area of 16 square meters).

Notes:

Safety Goggles and PVC or natural rubber gloves should be worn.

Warning:

Not Applicable

Sizes available:

500mL

Material Safety Data File:

View The MSD File Here (PDF Form)